> For the complete documentation index, see [llms.txt](https://docs.cloudeka.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.cloudeka.ai/guidance-for-enterprise/deka-gpu/deka-gpu-deka-vpn/configuration-deka-vpn-ipsec/ipsec-tunnel/view-ipsec-phase-2.md).

# View IPSec Phase 2

The **IPSec Phase 2** page displays a table of existing Phase 2 configurations. The table shows detailed information such as mode, protocol, status, Pfs Group, lifetime, local IP subnet, remote IP subnet, and description.

Select one of the VPN data that has already been created, click **More** then **Configuration**.

<figure><img src="/files/0xsTT8SktYWADNz20h1f" alt=""><figcaption></figcaption></figure>

On the IPSec page, go to **IPSec Tunnel** then click **More** then click **IPSec Phase 2**.

<figure><img src="/files/7DKSuRYlHyYtJRmksCvG" alt=""><figcaption></figcaption></figure>

The system will display a table listing all existing Phase 2 configurations. In addition to viewing details, actions such as Disable and Delete can be performed on each Phase 2 entry.

<figure><img src="/files/vKBkz3YxrW6COQNSv6Yd" alt=""><figcaption></figcaption></figure>

Click **More** then **Disable** to deactivate the configuration.

<figure><img src="/files/E0s01BIQ1kQUEAabewLp" alt=""><figcaption></figcaption></figure>

Click **More** then **Delete** to remove the configuration permanently.

<figure><img src="/files/1ZNq6qGjf6zPpYy0g5OF" alt=""><figcaption></figcaption></figure>