> For the complete documentation index, see [llms.txt](https://docs.cloudeka.ai/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.cloudeka.ai/guideline-for-individual/deka-vpn/configuration-deka-vpn-ipsec/ipsec-tunnel/view-ipsec-phase-2.md).

# View IPSec Phase 2

The **IPSec Phase 2** page displays a table of existing Phase 2 configurations. The table shows detailed information such as mode, protocol, status, Pfs Group, lifetime, local IP subnet, remote IP subnet, and description.

#### There are Steps to View IPSec Phase 2

* Select one of the VPN data that has already been created, click **More** then **Configuration**.
* On the IPSec page, go to **IPSec Tunnel** then click **More** then click **IPSec Phase 2**.

<figure><img src="https://content.gitbook.com/content/dRGHNSPw8ps5rkLJZT3A/blobs/IcE7kM5OSWYbesdtYzfj/image%20(6).png" alt=""><figcaption></figcaption></figure>

* The system will display a table listing all existing Phase 2 configurations. In addition to viewing details, actions such as Disable and Delete can be performed on each Phase 2 entry.

<figure><img src="https://content.gitbook.com/content/dRGHNSPw8ps5rkLJZT3A/blobs/rdfgKkzKKnGzPwoN4B1z/image%20(8).png" alt=""><figcaption></figcaption></figure>

* Click **More** then **Disable** to deactivate the configuration.

<figure><img src="https://content.gitbook.com/content/dRGHNSPw8ps5rkLJZT3A/blobs/VzugUNd2PyujrSVQtfLh/image%20(9).png" alt=""><figcaption></figcaption></figure>

* Click **More** then **Delete** to remove the configuration permanently.

<figure><img src="https://content.gitbook.com/content/dRGHNSPw8ps5rkLJZT3A/blobs/5MZw6VHdIEso5DXWLMYN/image%20(10).png" alt=""><figcaption></figcaption></figure>